Optofluidic microsystem with quasi-3 dimensional gold plasmonic nanostructure arrays for online sensitive and reproducible SERS detection

Practical applications of chemical and biological detections through surface-enhanced Raman scattering (SERS) require high reproducibility, sensitivity, and efficiency, along with low-cost, straightforward fabrication. In this work, we integrated a poly-(dimethylsiloxane) (PDMS) chip with quasi-3D gold plasmonic nanostructure arrays (Q3D-PNAs), which serve as SERS-active substrates, into an optofluidic microsystem for online sensitive and reproducible SERS detections. The Q3D-PNA PDMS chip was fabricated through soft lithography to ensure both precision and low-cost fabrication. The optimal dimension of the Q3D-PNA in PDMS was designed using finite-difference time-domain (FDTD) electromagnetic simulations with a simulated enhancement factor (EF) of 1.6 × 10⁶. The real-time monitoring capability of the SERS-based optofluidic microsystem was investigated by kinetic on/off experiments through alternatively flowing Rhodamine 6G (R6G) and ethanol in the microfluidic channel. A switch-off time of ∼2 min at a flow rate of 0.3 mL min⁻¹ was demonstrated. When applied to the detection of low concentration malathion, the SERS-based optofluidic microsystem with Q3D-PNAs showed high reproducibility, significantly improved efficiency and higher detection sensitivity via increasing the flow rate. The optofluidic microsystem presented in this paper offers a simple and low-cost approach for online, label-free chemical and biological analysis and sensing with high sensitivity, reproducibility, efficiency, and molecular specificity.     

Analytical potential of a laser ablation–glow discharge–optical emission spectrometry system for the analysis of conducting and insulating materials

The analytical capabilities of a glow discharge (GD) as a secondary source for excitation/ionization of the material provided by laser ablation (LA) have been compared to conventional laser induced breakdown spectroscopy (LIBS). In LA–GD both sources can be independently adjusted to optimize the sampling process and then its subsequent excitation. This could involve a number of analytical performance advantages, such as reduced matrix dependence, greater precision and sensitivity than those encountered in LIBS. For such purpose, an ablation chamber design including two electrodes to generate the GD discharge has been built and assayed. A comparison between LIBS and LA–GD–OES has been carried out, both, under reduced argon and helium atmospheres. Different sets of samples (conducting reference materials, glass and fluorine pellets) have been used to evaluate the novel coupled technique. The LA–GD coupled system has shown to provide lower detection limits. In addition, best linear correlations between intensities and concentrations and lower matrix effects have also been found using the coupled system. Moreover, special advantages of the LA–GD–OES have also been demonstrated for the analysis of fluorine.     

Development of models for prediction of the antioxidant activity of derivatives of natural compounds

Antioxidants are important for maintaining the appropriate balance between oxidizing and reducing species in the body and thus preventing oxidative stress. Many natural compounds are being screened for their possible antioxidant activity. It was found that a mushroom pigment Norbadione A, which is a pulvinic acid derivative, shows an antioxidant activity; the same was found for other pulvinic acid derivatives and structurally related coumarines. Based on the results of in vitro studies performed on these compounds as a part of this study quantitative structure–activity relationship (QSAR) predictive models were constructed using multiple linear regression, counter-propagation artificial neural networks and support vector regression (SVR). The models have been developed in accordance with current QSAR guidelines, including the assessment of the models applicability domains. A new approach for the graphical evaluation of the applicability domain for SVR models is suggested. The developed models show sufficient predictive abilities for the screening of virtual libraries for new potential antioxidants.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

An integrated platform for gas-diffusion separation and electrochemical determination of ethanol on fermentation broths

An integrated platform was developed for point-of-use determination of ethanol in sugar cane fermentation broths. Such analysis is important because ethanol reduces its fuel production efficiency by altering the alcoholic fermentation step when in excess. The custom-designed platform integrates gas diffusion separation with voltammetric detection in a single analysis module. The detector relied on a Ni(OH)₂-modified electrode. It was stabilized by uniformly depositing cobalt and cadmium hydroxides as shown by XPS measurements. Such tests were in accordance with the hypothesis related to stabilization of the Ni(OH)₂ structure by insertion of Co²⁺ and Cd²⁺ ions in this structure. The separation step, in turn, was based on a hydrophobic PTFE membrane, which separates the sample from receptor solution (electrolyte) where the electrodes were placed. Parameters of limit of detection and analytical sensitivity were estimated to be 0.2% v/v and 2.90 μA % (v/v)⁻¹, respectively. Samples of fermentation broth were analyzed by both standard addition method and direct interpolation in saline medium based-analytical curve. In this case, the saline solution exhibited ionic strength similar to those of the samples intended to surpass the tonometry colligative effect of the samples over analyte concentration data by attributing the reduction in quantity of diffused ethanol vapor majorly to the electrolyte. The approach of analytical curve provided rapid, simple and accurate analysis, thus contributing for deployment of point-of-use technologies. All of the results were accurate with respect to those obtained by FTIR method at 95% confidence level.     

Quantitative surface-enhanced Raman measurements with embedded internal reference

Analytical applications of SERS are often more associated with qualitative than quantitative analysis, because of the difficulty in obtaining quantitative SERS results. In this paper we introduce a new strategy to quantitatively measure the SERS signals of analytes based on Au-core/Ag-shell nanoparticles with embedded 4-aminothiophenol as the internal reference. Successful detections of two analytes, Toluidine Blue O in aqueous solution (detection limit of 0.1 μM) and melamine in milk (detection limit of ∼5 μM), are demonstrated. The improvement in the linear fitting illustrates that the use of internal reference significantly improves the accuracy of the quantitative SERS measurements. The successful detection of melamine in milk illustrates the versatility of this detection scheme for a wide variety of analytes.     

Analysis of peptides and protein digests by reversed phase high performance liquid chromatography–electrospray ionisation mass spectrometry using neutral pH elution conditions

In this study, the advantages of carrying out the analysis of peptides and tryptic digests of proteins under gradient elution conditions at pH 6.5 by reversed-phase liquid chromatography (RP-HPLC) and in-line electrospray ionisation mass spectrometry (ESI-MS) are documented. For these RP separations, a double endcapped, bidentate anchored n-octadecyl wide pore silica adsorbent was employed in a capillary column format. Compared to the corresponding analysis of the same peptides and protein tryptic digests using low pH elution conditions for their RP-HPLC separation, this alternative approach provides improved selectivity and more efficient separation of these analytes, thus allowing a more sensitive identification of proteins at different abundance levels, i.e. more tryptic peptides from the same protein could be confidently identified, enabling higher sequence coverage of the protein to be obtained. This approach was further evaluated with very complex tryptic digests derived from a human plasma protein sample using an online two-dimensional (2D) strong cation-exchange (SCX)-RP-HPLC-ESI-MS/MS system. Again, at pH 6.5, with mobile phases of different compositions, improved chromatographic selectivities were obtained, concomitant with more sensitive on-line electrospray ionisation tandem mass spectrometric (ESI-MS/MS) analysis. As a consequence, more plasma proteins could be confidently identified, highlighting the potential of these RP-HPLC methods with elution at pH 6.5 to extend further the scope of proteomic investigations.     

Electrical and Thermoelectrical Behavior of Binary Composites of Phosphate Glass Loaded with Zinc Fillers: Promising Materials for Photovoltaic’s

Homogeneous xPbO?(1?x) P₂O₅ glasses where 0 % :σ x<100 % have been successfully synthesized using a melt‐quenching method. The short range structures of the prepared samples were examined by Fourier transform infrared spectroscopy, x‐powder diffraction and scanning electron microscopy. The most stable vitreous phase is of composition 45 mol%PbO‐55 mol%P₂O₅; it was loaded with zinc volume fraction. We carried out experimental and simulative investigations of the electrical characteristics of p? n junction; the obtained results indicated that conductivity of the composites increases by increasing dopent concentration. It was also observed that the current voltage characteristics of the composite were found to be ohmic in nature, wherein drastic drop of the electrical conduction was observed at an accurate temperature of 405 K. Electrical behavior of the composites as function of filler concentration and versus temperature were explained respectively by percolation theory and positive temperature coefficient effect.     

Growth of cedar-like Au nanoparticles coating on an etched stainless steel wire and its application for selective solid-phase microextraction

A novel cedar-like Au nanoparticles (AuNPs) coating was fabricated on an etched stainless steel (SS) wire by direct chemical deposition and used as an efficient and unbreakable solid phase microextraction (SPME) fiber. The etched SS wire offers a rough surface structure for subsequent growth of AuNPs in chloroauric acid solution. As a result, the uniform cedar-like AuNPs coating with larger surface area was tightly attached to the etched SS wire substrate. The AuNPs coated etched SS fiber (AuNPs/SS) was examined for SPME of ultraviolet (UV) filters, phthalate esters and aromatic hydrocarbons coupled to high-performance liquid chromatography with UV detection. The fabricated fiber exclusively exhibited excellent extraction efficiency and selectivity for some aromatic hydrocarbons. Influential parameters of extraction and desorption time, temperature, stirring rate and ionic strength were investigated and optimized. The limits of detection ranged from 0.008 μg L⁻¹ to 0.037 μg L⁻¹. The single fiber repeatability varied from 3.90% to 4.50% and the fiber-to-fiber reproducibility ranged from 5.15% to 6.87%. The recovery of aromatic hydrocarbons in real water samples spiked at 2.0 μg L⁻¹ and 20 μg L⁻¹ ranged from 94.38% to 106.2% with the relative standard deviations below 6.44%. Furthermore the growth of the cedar-like AuNPs coating can be performed in a highly reproducible manner. This fabricated fiber exhibits good stability and withstands at least 200 extraction and desorption replicates.